Popular Articles
How to Program the IA4100 Speakerphone
General Programming To program an IA4100, IA3100, and IA500 series phone you need to use an analog phone or an IP phone that pushes DTMF tones and call the extension or phone number of the Emergency phone. When you dial the phone number to the Code ...
IA4100 Disconnects Upon Called Answered.
How do I get the IA4100 phone to hang up after the called party hangs up? By default, the IA4100 is looking for a 200 millisecond wink to hang-up the call. If your phone system is not issuing a 200 millisecond wink there are additional hang-up ...
Static On The Line - 3000/3100
Because the CB3000, CB3100 are half-duplex, audio switching phones, hum and static can block audio by the duplex controller in one direction. The cause of the noise requires locating and resolving appropriately: The noise may be internal to the CB ...
Programming - AED Key Fob
Programming involves opening the Code Blue unit (our special security bit will be required) and once inside you will see the door controller (pictured below). To program, the tech will insert a small screw driver into the hole next to the green ...
CB2-e Custom Camera Process and Pricing
Code Blue can build a CB2-e unit with a custom camera if the following is met: Charges are as follows: $650 – One time Engineering set up fee $150 – Cutout charge per CB2-e Customer will need to provide: -A CAD drawing with enough detail for us to ...